Getting the most out of your solar PV system

Once you  have had your solar photovoltaic (PV)system   installed, here is how to get the most out of it.

Reducing Electricity Demand

Reducing the amount of electricity you export

One way of making the most of your system is to use more of the electricity it generates at home rather than exporting it back to the grid.

Financially this makes sense because electricity bought from your electricity supplier (current average 15.32p/kWh) costs more than what you get back through the Feed-in Tariff (currently 4.64p/kWh). Using a current average electricity price, that’s a difference of 10.68p for every kWh (unit). (Note that import rates vary and export rates depend on your FIT eligibility date.)

You’ll need to be careful how you do this, though, as increasing your electricity usage to more than your  solar PV panels generate at any given moment can increase your electricity bills and not reduce them. Aim to reduce your electricity use first, and only after that to time your use to gain the maximum benefit.


Reducing electricity demand

Minimising the amount of electricity you consume may increase export but will reduce the amount of electricity that is bought back from your supplier. This can be done by improving your home’s energy efficiency:

If you don’t have an export meter fitted (normal if your solar PV system is less than 30kWp), you are deemed to be exporting 50% of the electricity generated back to the grid. Their FIT payment will be based on this amount no matter what their actual export is.

Steps that you can take to reduce the amount of electricity that you export in order of ease are:

  • Use electrical appliances during the day while your PV system is working , rather than at night.
  • for example washing machines and dishwashers (easy).
  • Use the excess electricity generated to generate heat (medium).
  • Use the excess electricity generated to generate hot water (medium).
  • Store the electricity generated in batteries (hard)

Use electrical appliances while you are generating electricity (easy)

You can adjust your behaviour so that you use appliances with a high energy demand such as washing machines, dishwashers, irons and vacuum cleaners when you are generating electricity on site. At the same time you can charge up devices such as laptops and mobile phones which run on batteries.

For a PV system this is during the day when your PV system is generating more electricity. You can buy electrical appliances with a timer delay that will let your appliances start working without your needing to turn them on, if you are out during the day.


Energy management systems

Shifting appliance use to times when electricity is being produced is known as ‘demand side management’ (DSM) or ‘demand response’ (DR) (similar techniques are used for people on Economy 7 or 10 tariffs with storage heaters, whereby the heaters only work at night when the network remote switches them on). Work is ongoing to establish technologies to automate this process.

Energy management systems are designed to prioritise and control the power generated by your micro-generator so you can choose how to use excess electricity and even create a plan for switching on or off particular appliances. During sunny conditions you can use the excess electricity to switch on electrical appliances, heat up hot water, or provide extra heating to your house. During holiday periods you can get maximum benefits by prioritising export power to the grid. Advanced management systems also let you switch off some appliances for short periods of time when microgeneration is low.

There is large variety of demand side management systems (EMMA, ImmerSun, GEO, Green Energy Options, the Solent Electronic Home and so on). Some of them have a web-based or smart phone monitor system that allows you to control electricity consumption in your house or adjust your settings according to the outdoor temperature.

If you don’t install a full management system, even a monitoring system can help you understand your patterns of electricity generation and consumption.


Use the excess electricity generated to generate heat (medium)

You might also consider using any excess electricity to top up the likes of electric storage heaters. If you do this you have to be particularly careful not to use more electricity than would otherwise be exported if you currently buy your electricity on Economy 7 or 10. This is because any extra electricity consumed during the day will cost you more than electricity consumed during the cheaper rates available at night using Economy 7 or 10 – making you worse off.

Use the excess electricity generated to generate hot water (medium)

One way of using excess daytime electricity in a more controlled way is to use it to generate hot water via an immersion heater. In order to be able to do this you will need:

  • a standard hot water cylinder with an immersion heater fitted
  • a PV  system ideally rated at 2kWp or more
  • the PV  system and immersion heater connected to the same consumer unit
  • an immersion relay to reduce the electrical consumption of your immersion heater from the usual 3kW to 1kW (alternatively to replace the existing 3kW immersion heater with a 1kW heater). If the electrical consumption of your immersion heater is not reduced in this way, there is a significant risk that you have to buy in electricity to make up the shortfall – costing you more rather than saving you money. But if your immersion heater is currently used to provide all your hot water (even if only at some times of the year), down-rating its output in this way is unlikely to be useful as you may find you have insufficient hot water for your daily needs.
  • a current sensing relay unit to detect how much electricity is being generated by your inverter and to switch over to the immersion heater at a set point – usually 1kW. This is done on the assumption that no more than 1kW is being consumed within the home and that any excess would normally be exported to the grid.


The advice in the UK is that hot water stored in a cylinder should be kept above, or periodically rise to, above 60°C to avoid the danger of Legionella bacteria. If your down-rated immersion heater cannot do this, you will need to ensure that your boiler comes on from time to time to provide this top-up heat.

If you normally use gas to heat your hot water you will need to consider carefully whether it is more cost-effective for you to use the surplus electricity generated in this way – even taking account of the fact that your immersion heater will be more efficient than your boiler, the payback time is likely to be twice as long as for other fuels

Store the electricity generated in batteries (hard)

Excess electricity generated by your PV system can be stored in batteries even if your system is grid connected. However, good quality batteries are expensive and will need replacing every 5 to 10 years depending on the amount they are used and the depth to which they are discharged.

Batteries are used mainly for off-grid systems; backup, grid-connected systems, and grid-connected systems.

Off-grid systems

These systems are for homes that do not have mains electricity supply and usually run a diesel generator. Read more about generating energy off-grid.

Backup, grid-connected systems

This type of system is used in areas where power cuts are common or where any power cut is critical (e.g. hospitals). There are systems (sold as system backups or power routers) on the market that can automatically switch over to battery power in the event of a power cut.

Grid-connected systems

This is becoming more attractive as electricity rates increase and the initial costs of battery technology go down. In a grid-connected wind or PV system the batteries do not need to store electricity for a long period of time. The function of the battery is to close the gap between when electricity is produced and when it is needed; this reduces the amount of electricity that is sold and then bought back later.

Batteries are not 100% efficient, so you do not get all of the energy out that you put in. So if your batteries and associated components have an overall efficiency of 50%, putting 1kWh into the batteries will give you out 0.5kWh.
Batteries and auxiliary equipment cost money and therefore the extra cash saved through installing batteries has to be enough to pay back your initial costs. With grid-connected systems the storage capacity of the batteries can be much less and therefore they can have a lower capital cost.